Pulse Jet type collector, rated at 420 cfm with a 99.99 % cleaning efficiency.
Rectangular design with the complete pulsing system located in the removable lid allowing for easier cartridge replacement.
Single compartment with (4) 5.5/8” x 20” top entry cartridges with a total of 52.80 sq. ft. of filtration area.
External air manifold with filter / regulator connection and moisture drain valve.
(2) ¾” solenoid valves are externally mounted for easy maintenance.
(1) filter/regulator is externally mounted and preset at the factory to 100 psi. A ½” quick connect air fitting for ½” air tubing is furnished.
90 – 100 psi air supply is furnished by the customer.
Mount Flange for customer installation.
The BPC-4 is designed to operate on its own and all cycle times are adjustable. Upon powering up the control system, the cycle timer will initiate a standard cleaning cycle. The control timer is set at the factory for a 30 millisecond blast of air every 15 seconds.
Wired and tested at the factory prior to shipments.
Customer is responsible for the 110-volt power supply.
Painted with two-part polyurethane in grey, white or tan.