325-203-1565          chiparocllc@gmail.com 

Copyright © Chiparoc. All rights reserved.

Chiparoc LLC 

325-203-1565          chiparocllc@gmail.com

Specifications

  •   Pulse Jet type collector, rated at 2400 CFM with a 99.99 % cleaning efficiency.
  •   Custom designed to utilize the customer’s existing mount flange.
  •   Rectangular design with the upper mounting flange only.  Required bolt holes by customer.
  •   Single compartment with (6) 8.1/4” x 54” top entry cartridges with a total of 400 sq. ft. of filtration area.
  •   Hinged lid allows access for cartridge replacement.
  •   (2) ¾” Asco valves are externally mounted for easy maintenance.
  •   (1) filter/regulator with ½” air tubing connector is externally mounted and preset at the factory to 100 psi.
  •   90 – 100 psi air supply is furnished by the customer.
  •   Factory installed mount and air-line ports for the optional minihelic gauge.
  •   The SPC-654 is basically designed to operate on its own and all cycle times are adjustable. Upon powering up the control system, the cycle timer will initiate a standard cleaning cycle.  The control timer is set at the factory for a 30-millisecond blast of air every 15 seconds. 
  •   Wired and tested at the factory prior to shipments.  Customer is responsible for the 110-volt power supply.
  •   Painted with two-part polyurethane.
  •   Customer is responsible for installation.

SPC-654 Silo Top Dust Collector